Corona Concrete Pouring

Concrete pouring is never easy. You will need to consider a wide range of factors such as the size, color, shape, finish, and depth of the residential project before you do the concrete pouring. After deciding on these steps, the concrete placement steps are similar in terms of surface preparation, layout, and concrete placement. Here are the steps involved in concrete placement.

You can reach them on (951) 482-7781 for free estimates. Corona Concrete and Masonry offer the best services of concrete pouring in Corona.

The Sale

After choosing concrete pouring, your next step will be to ask for bids from a concrete contractor. You will need to compare various bids before choosing the best company based on price, experience, scheduling, and curb appeal. Remember to discuss the logistics and price with the concrete contractor. Some of the concrete contractor's details should include the work to be done, expected finishing date, texture, color, and warranty details.

Site work

You need to prepare the site before concrete placement. You will need to clear and clean the area. The contractor can use earth moving equipment to hasten the process. All rocs', trees, shrubs, grass, and old concrete should be removed. The concrete contractor should also prepare a sub base with a minimum of four inches of road base or granular fill. This is necessary unless the area has a very stable and compact soil. The concrete contractor should place and compact the sub-base.

Forming

After the preparation of the sub-base, it's time to set forms. These forms are made of wood, plastic, or metal. However, wood is the most common material for residential projects. The forms are then attached to stakes using screws to ensure they can be easily removed. The forms should offer the right grade or slope for drainage.

Placement

The concrete contractor should start by ordering a concrete mix that meets the need of the slab that requires placement. The wet concrete will then be poured into these forms. During the concrete pouring process, rakes and shovels will be used to spread the concrete so that there are no air pockets or voids.

Early finishing

After placing the wet concrete into forms, wood board, or large metal is used for screeding the concrete top. The goal of the screening process is to ensure that the concrete is consolidated and compacted. After the screeding, concrete floating is done using afloat.

Troweling

If you opt for the broom finish, you will not need an additional finishing after doing the floating. If you need a stamped or smooth toweled surface, you will need a steel trowel finish. The concrete should then be allowed to rest until the surface is hard enough. After it has become firm, steel troweling should be done to create a hard, smooth, and uniform finish.

Finish

After the troweling is completed, it is time to apply the final finish. A broom finish is a basic form of finishing.

Curing

After the concrete placement and finishing, it is time to allow the concrete to rest and cure. The curing process often takes 28 days. The first 48 hours are the most important.

To determine the best concrete finishing for your project, you need to contact a concrete contractor. One of the names we recommend is Corona Concrete And Masonry.

You can reach us at (951) 482-7781.